SCHRAMM T130XD 760HP DRILLING RIG

Product Description

• Date of Manufacture: August 2008
• In Service Date: March 2010
• Fast Moving Highly Mobile Rig
• Comes complete with backyard
• 130,000 lbs. (59,090 kg) actual pullup
• T130XD will get you to the jobsite when access roads require a compact machine
• Range III casing

 Hydraulic Catwalk (Load Safe)  500 bbl Water Tank  Trailer Mounted 25 FT Dog House with 180KW Generator and 1500 Gallon Fuel Tank  300 bbl Single Mud Tank with Dual Shakers and Dual Suction  5 FT Floor and 30 FT Base Beam  Living Quarters with 20KW Generator and 250 Gallon Water Tank  Crain Carrier T130XD – Ready for Mobilization  Trailer Mounted WF660 Triplex Mud Pumps with John Deere 400HP Diesel with Allison 10-speed Transmission  Trailer Mounted 30 FT Parts House  3500 FT 4 ½ XHole Drill Pipe  (12) 6 inch 4 ½ XHole DC  (3) 8 inch DC  Assorted Crossover Subs  Assorted Suction and Discharge Hoses

 

DECK ENGINE
· Detroit Diesel DDC/MTU 12V-2000TA DDEC
· 760 bhp (567 kw) @ 1800 rpm
· 2 x 110 gallon (415 l) fuel tanks
· Air or electric start available
STANDARD COMPRESSOR
· Variable volume two-stage, oil flooded rotary screw compressor
· Selectable air: 1,150 cfm @ 500 psi or 1,350 cfm @ 350 psi
(32.6 m3/min @ 35.5 bar, 38 m3/min @ 24.1 bar)
· Schramm patented air-Control
COOLING
· Three core, side by side heat exchanger with variable speed
cooling fan
· 117°F (47°C) ambient design temperature
CARRIER
· CCC 8 x 4 carrier
· Cummins engine rated 425 hp @ 2,100 rpm
· 44,000 lb (19,955 kg) front axle
· 21,500 lb (9,750 kg) pusher axle
· 52,000 lb (23,587 kg) full locking rear axle
· 117,500 lb (53,298 kg) GVWR
MAST
· Telescoping mast design permits long head travel and working
height, yet short overall length in transport position
· Free-standing mast design
· Hydraulically operated adjustable mast feet
· 69 ft 9 inches (21.25 m) overall height fully extended
· 42 ft 9 inches (13 m) overall height retracted for transport
TOP HEAD DRIVE · Heavy duty, single reduction gearbox with multiple disc
valve type hydraulic motors
· Infinitely variable rotation speed via HRC control
· Maximum Torque: 8,884 ft-lbs (12,045 N-m)
· Rotation Speed: 0-143 RPM
· Maximum operating pressure: 3,000 psi (208 bar)
FEED SYSTEM
· 50 ft (15.24 m) head travel
· 130,000 lbf (578 kN) pullback
· 125 fpm (38.1 m/min) pullback speed
· 32,000 lbf (142 kN) pulldown
· 270 fpm (82.3 m/min) pulldown speed
DRILL TABLE
· Table Opening: 20 inches (508 mm) or 28 inches
(711 mm) with table retracted
· Hydraulically retractable slip box
DRILL PIPE AND CASING
· Range III tubular capability
· 28 inch (711 mm) maximum diameter
through the slip box
OUTRIGGERS
· Single Front – 5 inch (127 mm) bore x 41 inch (1.04 m) stroke
· Dual Rear – 5 inch (127 mm) bore x 41 inch (1.04 m) stroke
WINCH
· Planetary design with spring applied hydraulic release brake
· 9,600 lbf (42.7 kN) bare drum line pull
· 150 fpm (46 m/min) bare drum line speed
HYDRAULIC SYSTEM
· Open loop load sensing system
· 200 gallon (760 l) system capacity
· 7 micron filtration
WATER INJECTION SYSTEM
· 25 gpm (95 lpm) water pump
· Electric foam pump
TOOL LUBRICATOR
· Positive displacement, air operated piston type pump
· Oil flow: 0 – 5.0 g/hr (0 – 19 l/hr)
LIGHTING & ELECTRICAL SYSTEM
· 24 volt DC electrical system
· Mast – (4) 60 watt floodlights
· Control Panel – (2) 60 watt gauge floodlights
· Work – (3) 70 watt halogen
RIG WEIGHT AND DIMENSIONS
Note: For general illustration only, varies with rig configuration
· OA length, transport: 42 ft 9 inches (13 m)
· Front mast down transport overhang ranges 6 – 8 ft (1.8 – 2.4 m)
· OA width: 8 ft 6 inches (2.6 m)
· OA height, transport: 13 ft 6 inches (4.1 m)
· Typical GVWR: 100,000 – 110,000 lbs (45,359 – 49,895 kg)